Archive for the ‘Spinning And Weaving’ Category

Spinning and Weaving Techniques

Spinning and weaving can be done in a variety of ways and using different types of materials. You can change and adjust some of the techniques, however, depending on what you are trying to achieve. You should know some of the basic twisting and spinning methods to create even lines and patterns. Here is some more information on how to begin.

Twisting First

Tie the yarn around the shaft of the drop spindle. Make sure that this is tied around the long portion, next to the whorl. Turn the drop spindle a number of times in the arrow direction, then let the yarn wrap around the shaft. Take the starter yarn through the hook or notch at the drop spindle top. A top whorl drop spindle can hang from the starter yarn. A spindle, will do similarly in the end, although you need to rest it on a table to prevent falls. The lower hand will turn the drop spindle and let go of the twist. The upper hand will hold the fiber, slowly preparing it to turn into yarn, then prevent the twist from moving right into the fiber fore you spin.

The Spindle Activity

Spin the drop spindle in the arrow direction, the hold the loose end of the starter yarn using the upper hand, as you watch the twist collect in the yarn. Feather out a single and of the fiber then overlap it right on the yarn. Pinch the yarn and fiber using the lower hand, then pinch just over the point using the upper hand. Rotate using the lower hand, then move the hand up to the pinch position. Do not worry much about the spindle’s activity, but keep it from turning backward, away from the arrow then let go of the twist.

Sometimes the most important aspects of a subject are not immediately obvious. Keep reading to get the complete picture.

More Spinning

It is acceptable for the spindle to flop over one side after it has rotated successfully, or once you stop it. When there is a twist in the starter yarn, you can continue working. Position the upper hand up the fiber, pulling a little to loosen the fiber between the hands. Pinch the fiber using the uuper hand then slide the lower hand next to it. The twist glides behind the lower hand to produce yarn successfully.

Spinning Tips

The hands will repeat the pinch, pull and slide motions, while the lower hand will sometimes reach down to rotate the spindle. When you practice, you will feel the constant motion. The yarn will be strong enough to support the movement. Wind by keeping the yarn from tangling then catch behind the elbow. Release the hook end and turn the drop spindle.

On the Breaks and Bumps

Bumps and breaks occur in the yarn when too much fiber is between the fingers when the twist occurs and converts into yarn. The lower hand should be pinching a little on the twist, up to the time the upper hand pulls out the fiber and prepares it well. You will notice breaks or bumps when too little fiber is between your fingers.

The day will come when you can use something you read about here to have a beneficial impact. Then you’ll be glad you took the time to learn more about Spinning And Weaving.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

Learning How to Spin Fabric

Having a lot of sheep = advantage

Many of those who have a lot of sheep as their livestock just recently found out that there is more than one benefit from having a single one. There are a lot of things that people can earn from with sheep. For instance, they only have to harvest the wool from the sheep?s body and then use it to knit scarves by spinning it. These scarves are usually used during winter.

Is it difficult?

People have oftentimes wondered if the ancient people who manually did some spinning, weaving and sewing found it difficult. They had to spin the clothes they had to wear by themselves from cotton, flax or wool.

At present, people do not have to spin or weave fabric just so they could have something to wear. They probably cannot even imagine having to knit their clothes or their socks from cotton and spin it into threads.

People have the freedom to decide if they want to learn how to spin yarns and knit them for beautiful scarves or sweaters that are made of wool. They do not have to spin or weave the clothes they put on their bodies, but they could have the luxury to learn how to spin or weave for fun.

Wool directly from sheep

You may not consider everything you just read to be crucial information about Spinning And Weaving. But don’t be surprised if you find yourself recalling and using this very information in the next few days.

If the wool comes directly from the sheep, they will have to wash the fleece first before anything else. Afterwards, the fleece should be checked for some short guard hairs because any fiber that is shorter than one inch will not look good after being spun. Thus, the best way is to remove these short and useless fibers and discard of them completely.

Getting started

Once the wool has been collected, they have to be placed into the electric carders, if electric carding machinery is convenient. Without an electric carder, only small clumps of wool should be used. Place the tiny clumps on the center of a paddle, making sure that the paddle?s hands are not pointing towards each other, and then brush the wool.

Once all knots have already been worked out, just peel out the wool that has already been carded so that the bristles are removed. After this is done, roll the whole thing like a sausage and it is now ready for the spinning process.

Time to spin

For those who have always dreamed of having their very own spinning wheels like in famous fairy tales they have to save hundreds of dollars. In order to save, they can always just buy some affordable drop spindles that can be found in most fiber sellers.

Also, a homemade drop spindle can also be used with the help of two old compact discs and a piece of a half inch dowel rod that measures around twelve inches. Leave just an inch and one half on one of the ends and place a screw-in hook at the shorter end of the rod. When this is done, the drop spindle is made.

You can’t predict when knowing something extra about Spinning And Weaving will come in handy. If you learned anything new about Spinning And Weaving in this article, you should file the article where you can find it again.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

Advanced Spinning Techniques

If you want to make very consistent and good quality thread, you have to understand the different processes involved in spinning. Spinning has been available for thousands of years, and the traditional methods are still very much used today by expert spinners and weavers. You can start the activity as a hobby right in your own home without much trouble or cost.

To Spin Fiber

The beginner or intermediate spinner can choose wool fiber that is coarser, because this is easier to spin and draft. They will find that extremely fine wool fibers are very slippery and might be harder to control until they get more experience. The twist may also be hard for most beginners. To start, you will need a spinning wheel and fiber. A lot of spinning wheels have 3 or 4 bobbins. These are generally used to ply yarns. Three bobbins is the least you need, so that you can create a 2-ply yarn. A lot of spinners can keep several bobbins so that you can go back and forth from one spinning project to the next.

Materials Required

You will also need to wind the yarn spun and plied into a skein. You can then count the number of yards of yarn you have spun. You can spin the right amount for your needed work. The twist of the yarn can be set with the aid of a handheld steamer. You can refer to the internet and a number of books to get more tips on spinning by hand.

If you don’t have accurate details regarding Spinning And Weaving, then you might make a bad choice on the subject. Don’t let that happen: keep reading.

You do not need a distaff to spin flax. A distaff is generally used for long line flax. The flax fibers are very long, reaching 1 yard or so, and will need meticulous preparation and dressing on a distaff before you spin. You can spin commercial flax top without using a distaff. This can be spun dry for a hairy result. Using a subtle sheen, you can also spin it wet to get smooth yarn. Linen yarn usually gets softer and more pliable if worn out.

How to Spin

To make socks, you need about 4 ounces of fiber, for a vest, you will need 16 ounches, and for a sweater, you will need around 24 to 32 ounces of fiber. The fiber amount needed will change depending on the type of fiber, design of the garment and the size of the garment. The knit and length cables can be quite handy in adding to the number of fibers you need to complete the work.

Vital Preparations

Draft the fibers beforehand, so that these will become easier to handle. You will find that starter spinners will need to predraft and loosen the wool to create evenly spun yarn. There are also hand-painted wool fibers that can be spun in different ways to get various color patterns. Ply the same wool fiber independently using the right plying technique so that it changes color every few inches. Preparation is very important so that you get consistent and quality results every time.

About the Author
By Anders Eriksson, now offering the host then profit baby plan for only $1 over at Host Then Profit

How to Choose the Best Spinning Wheel

Have you ever wondered if what you know about Spinning And Weaving is accurate? Consider the following paragraphs and compare what you know to the latest info on Spinning And Weaving.

If you are looking for the right spinning wheel that will render the best quality results, you have to choose the one that best suits your needs, and not anybody else’s. The spinning wheel that your friend has may not be right for you, depending on your personal preference and style of working. You should consider a few features to get the best model.

The Available Features

First, consider portability. If you are attending spinning and weaving classes, it is important that you master your own machine. Pick the spinning wheel that you can conveniently bring to classes, spin-in workshops and other places during vacation. You should also consider the available space you have and where you intend to store the item during travel like your car or the overhead compartment of an airplane. If you have enough space, you may pick a more stylish spinning wheel to double as a decorative piece.

Pick the best spinning wheel that gives you enough comfort. You should feel very confident and comfortable in your spinning position as you work. The treadle should be quiet, and the bobbins easy to manage. You can upgrade some types of spinning wheels as you progress in your work and skills. You can also purchase a whorl or fast flyer for high speed spinning. If you need to replace some parts in the future, make sure you have the supplier at hand.

On Style

It seems like new information is discovered about something every day. And the topic of Spinning And Weaving is no exception. Keep reading to get more fresh news about Spinning And Weaving.

Experts recommend choosing a spinning wheel based on its features and not on the aesthetic features only. You may find that some of the most beautiful designs are very uncomfortable to handle, depending on your height and arm reach. If you are advanced in terms of skill and want to use the spinning wheel as decoration in the living room, you can pick a visually aesthetic one, considering it also has all the needed features.

On the Treadle

You should choose between getting a single treadle or a double treadle. A double treadle wheel is advantageous if you intend to spin for several hours at a time. The double treadle requires you to sit upright just in front of the wheel. You can prevent back pains this way and continuously spin. If you are a beginner or have gotten used to the single treadle, then you can still stick with this one. Choosing between a single or double treadle is actually a matter of personal preference.

Accessories to Add

Find the right skein winders that can wind various sizes of yarn. There are adjustable types that are very easy to use. Skein winders can wind yarn faster and is ideal if you have a lot of yarn to wind. You can also wind the yarn into a ball easily using adjustable skein winders. Another great accessory is the umbrella swift, which can hold yarn skeins well. These can quickly be wound into balls. The devices are available in a wide array of sizes and may either be wood or metal. Ball winders can create center pull balls that you can easily stack.

About the Author
In entertainment news, find Taylor Swift Tickets now for the 2013 Taylor Swift RED Tour. See Taylor Swift Live as she performs new songs off her RED album and a lot of her other great hits!
By Taylor Swift Tickets, feel free to visit our Taylor Swift Tickets site: Taylor Swift Tickets

Navajo Indian Weaving

Navajo Indian weaving is actually a very fine art. The people of Navajo learned how to weave from their neighbors who were the Pueblo Indians, with some help from those who are not Indians as well. Without the help of those who were part of this discovery, this great art may not have been known as the great art it is known for today.

The teachers

According to the natives of Navajo, a deity they revered as the Spider Woman was the one responsible for teaching them how to weave. Moreover, they said that the first loom in their area was from the sky and that the tools used for the weaving process were crystal, sunlight, shells, and lightning. Actually, the truth was that the Pueblo Indians were the ones who taught the Navajo natives how to weave.

Cultivation of cotton

The Pueblo natives who lived in the Northern part of New Mexico were starting to cultivate even more cotton in 1300 AD after they realized that cotton was best for weaving. They skillfully practiced fingerweaving and even learned how to properly use the back strap loom which even originated from the tribes of Mexican India.


Back then, weaving was regarded as one of man?s common activities in most pueblos. They proceeded with the weaving processes in the kiva, which is a ceremonial room. Actually, this ceremonial room is merely a cramped space that further inspired the invention of the upright loom.

From cotton to wool

It seems like new information is discovered about something every day. And the topic of Spinning And Weaving is no exception. Keep reading to get more fresh news about Spinning And Weaving.

When the Spaniards arrived with their Churro sheep back in the sixteenth century made them decide to use wool as their weaving material instead of the usual cotton. The Pueblo Indians were one of the first ones to ever start weaving wool instead of cotton. In only a short time, the natives of Navajo learned this from their neighbors and started to practice this new method of weaving as well.

The Pueblo rebellion

There was a rebellion back in 1680, and it intensely had great influences on how the local Indians lived their lives. However, weaving still continued to evolve with a lot more designs.

It was around this time that the plain tapestry technique started to be quite famous. Other patterns that were popularly used were diagonal twills, herringbone, and diamond. With wool, seamstresses could now come up with shoulder blankets, dresses, shirts, belts, door hangings, saddle blankets, hair ties, blankets, and kilts.

From men to women

When weaving was first practiced, many looked at it like it was a man?s work. In fact, back then, the men were the ones who could be found weaving. Now, however, weaving is something a woman does.

Lazy lines

Moreover, the women of Navajo even discovered a certain ?pause? in their techniques which somehow came up with what they referred to as ?lazy lines?. These lazy lines are merely diagonal lines that are made across the horizontal wefts.

After some time, a lot of weavers were already doing this particular add-on to their certain technique in order to produce terraced lines and some other design elements. With the lazy lines, more colors can also be used.

If you’ve picked some pointers about Spinning And Weaving that you can put into action, then by all means, do so. You won’t really be able to gain any benefits from your new knowledge if you don’t use it.

About the Author
In entertainment news, find Taylor Swift Tickets now for the 2013 Taylor Swift RED Tour. See Taylor Swift Live as she performs new songs off her RED album and a lot of her other great hits!
By Taylor Swift Tickets, feel free to visit our Taylor Swift Tickets site: Taylor Swift Tickets

Weaving Since the Stone Age

Spinning and weaving were found to have originated since the stone age. The earliest looms and threads were made from raw materials only by hand. However, the techniques we have today are still reminiscent of the very old methods. The development of the techniques has been influenced by different nations and cultures all over the globe. Here is some more information on how weaving and spinning came to be at present.

The Past Few Millennia

Early men developed the first string 20,000 to 30,000 years ago by twisting and twining handfuls of fibers that come from plants together. They prepared thin bundles of plant material and stretched these out as they twisted the material together to create fine thread or string. Weaving, sewing and spinning today began with the ability to create thread and string. Men during the stone age continued making strings and threads for various reasons. These strings had various sizes and were laced and knotted together to create several functional items, like home covering and clothes.

A lot of weavers today still use the technique of finger weaving, wherein threads are knotted and laced together using only the hands. During the Neolithic Age, the first weaving looms were created and developed. Basic weaving looms are artificial items that hold the vertical threads or warp together tightly to let the weaver insert weft threads. Two of the earliest forms of looms include the warp weighted loom and the horizontal ground loom.

If you don’t have accurate details regarding Spinning And Weaving, then you might make a bad choice on the subject. Don’t let that happen: keep reading.

The Available Looms

The warp weighted loom is created using big wooden poles that are held together forming a rectangular shape. The poles can be mounted over a wall or dug into the ground to create a freestanding loom. The vertical threads or warp are held together at the top pole. Near the bottom of the frame, you will find the threads held together in clumps and secured to stone weights or clay weights. Using his hands, the weaver positions the weft threads via the warp while standing right in front of the loom. The warp weighted loom is now used by many weavers.

The horizontal ground loom features a very basic organization of poles and sticks driven right into the ground. The weaver measures the width and length required to weave the cloth and drives the sticks right into the ground. The warp or vertical threads are wound onto the sticks and tied together in place. The weaver works the horizontal threads using his hands and throughout the stretched warp. The ground loom is still used at present in the Near East by Bedouin weavers.

Chinese Influence

In China, the Shang Period witnessed the development of the treadle and frame loom system. Weaving frames that have rectangular shapes held the heddles together. The heddle is described as a long string that resembles a needle or a metal item that has an eye or opening right in the middle. The doup or loop at the bottom and top of every heddle can be seen too. The top and bottom doups are threaded at the bottom and top cross bars. The warp yarns are threaded through the heddle eye.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

The Spinning Wheel

The spinning wheel has been used by weavers for hundreds of years. Up to now, several people the world over are still using the tool, even though it is now available in a variety of designs, functions and types. You can find spinning wheels working mechanically, while there are also electronic versions that make very intricate and even designs.

About the Wheel

A spinning wheel is described as a device used to spin yarn or thread using synthetic or natural fibers. The earliest clear images of the spinning wheel originated in Baghdad in 1237, Europe 1280 and China 1270. The spinning wheels may already have been in use in China and the Islamic world during the eleventh century. The spinning wheel was presented to India by Iran during the thirteenth century.

The spinning wheel substituted the earlier approach of hand spinning using a spindle. The first stage in mechanizing the process was to mount the spindle in a horizontal manner, so it can be rotated using a cord that encircles a big hand-driven wheel. The great wheel is a good example of this kind, wherein the fiber is held in the left hand, while the wheel is gradually turned using the right hand.


The fiber is held at a slight angle to the spindle to provide the required twist. The spun yarn was wound onto the spindle by moving it so that a right angle is formed using the spindle. The type of wheel, although known in Europe in the 14th century, was not in general use until the later years. The wheel was used widely to spin different yarns until the start of the 19th century and the mechanization of spinning.

Truthfully, the only difference between you and Spinning And Weaving experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Spinning And Weaving.

The Technology

The technology used for spinning was already widespread before most of the people adopted, thereby making it difficult to adjust the dates of the developments. In 1533, a Brunswick citizen is known to have added a treadle, wherein the spinner can rotate the spindle using one foot and still have two hands to freely spin. The flyer was drawn by Leonardo da Vinci, which twists the yarn before it winds onto the spindle. During the 16th century, it was very common to use a treadle wheel with flyer. This has become widely popular because the weaver does not need to stop spinning to wind the yarn.

New Changes

The Industrial Revolution during the 18th century affected the spinning industry greatly by mechanizing the spinning wheel. The Roller Spinning machine was patented by John Wyatt and Lewis Paul. More improvements ensued leading to the first open end spinning mills and the rotor mills in the United States during the 1780s and 1790s. More modern machines followed which used a mechanical approach to rotate the spindle. An automatic method was used to draw out the fibers. There are now new technologies that provide faster yarn production.

The Internet

You can now order spindles and spinning wheels online depending on the type of work you want to complete. There are several web sites and forums where you can meet the experts and talk about the different available yarns and spindles you can use for the best work.

It never hurts to be well-informed with the latest on Spinning And Weaving. Compare what you’ve learned here to future articles so that you can stay alert to changes in the area of Spinning And Weaving.

About the Author
By Anders Eriksson, now offering the host then profit baby plan for only $1 over at Host Then Profit

Spinning and Weaving 101

Spinning and weaving have been present for thousands of years. Today, there are new machines that can relatively make the work easier. The technique, however, remains very much unchanged despite the trends and other contemporary designs that have been recently introduced. It is vital that you first understand what each activity is to determine if it is right for you. You will make better works by focusing on the various aspects.

What is Weaving?

Weaving is described as the interlacing of 2 or more pieces of material or threads together to make a joined structure or work of art. The process is frequently used to create cloth, although you will also find that the approach is very common in other types of activities like basket making. Weaving has been present for thousands of years and is very popular in the modern age, as it was back in ancient history.


The goddess Minerva is believed to be the one who introduced the technique of weaving to human beings. The goddess supposedly turned a boastful maiden into a spider after bragging about her excellent weaving skills. Weavers are widely regarded as artisans all throughout history and the world over, since their work led to the widespread availability of cloth and fabric for various uses. Other techniques are also used popularly to make items like mats, rugs and baskets. The strength of the material meshed through weaving is very durable and sturdy. These are also highly adaptable for various functions and uses.

The Principle

I trust that what you’ve read so far has been informative. The following section should go a long way toward clearing up any uncertainty that may remain.

Cloth weaving follows the basic principle of lacing a couple of thread sets together at a 90-degree angle. The warp is made of thread laid parallel to each other and stretched over a structure or loom to hold everything in place. The weft or woof is pulled through the warp in a pattern going under and over. The single joined piece will then be completed afterwards.

The Tools

The most important piece or tool for weaving is the loom. The structure is described as a frame that holds the warp well and will pull the weft thread or woof through. Some of the early types of the loom can be observed in paintings 4000 years old or older, up to the Industrial Age wherein the loom was produced in huge volumes. The flying shuttle was invented by John Kay in the 1900s in the United Kingdom. The shuttle let weavers work very efficiently on big looms without the help of an apprentice to pull the weft thread through. Mechanical looms was widely available during the 20th century. Hand-weaved items were almost obsolete at the time.

Recent Developments

Spinning and weaving are now very popular as a home craft and hobby. There are very beautiful styles, plaid and tweed fabrics, as well as traditional tartan fabrics that came from the British Isles that are made by experts using traditional hand methods. The new designs have been highly influenced by the availability of mechanical looms.

People need both talent and time if they want to master the art. The activity is also highly considered as a boutique craft. You can get supplies and expert information from local fabric and sewing stores. You can also visit different web sites online and talk to other master weavers in online forums. This is a very good hobby for people who already have a background in crocheting, sewing and knitting.

The day will come when you can use something you read about here to have a beneficial impact. Then you’ll be glad you took the time to learn more about Spinning And Weaving.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

Spinning Yarn

Hand spinning yarn is actually quite popular these days. This is why the population of crocheters and knitters has largely increased, and so has their purchase of treadling wheels and spindles.


Knitting is now known to be one of the favorite hobbies of lots of women, children, and even men, all around the globe. This is perhaps the main reason why the number of spinners is also increasing.

Back then, spinning is only regarded as an essential part of the cottage industry which kept families properly and comfortably clothed by using the fleeces that were shorn from the sheep that they, themselves, raised. But now, spinning yarn is known to be such a perfect complement to hobbies related to crochet and knitting.

Reasons to learn how to spin yarn

Having a ?love affair? with yarn is the same with knowing how to correctly and properly weave, crochet or knit. Producing just the right kind of yarn has the ability to come up with an exceptional project. Moreover, knowing how to come up with techniques that can substitute different kinds of yarns properly is an expert skill of crocheters or knitters.

Learning how to spin yarn the right way gives the person a much broader and deeper understanding of what makes a specific yarn fiber good. This means that that particular person can now have the skill of choosing the perfect yarn for a certain project.

Most of this information comes straight from the Spinning And Weaving pros. Careful reading to the end virtually guarantees that you’ll know what they know.

Spinning as form of meditation

Furthermore, the act of spinning itself is regarded by many as a peaceful, very soothing, and meditative process once it is correctly learned. Also, purchasing a fiber that has already been prepared is a lot cheaper as compared to purchasing ones that have been spun using commercial techniques and machinery. This means that if people only knew how to spin their own yarn, then can afford to get themselves a fiber that is made of better quality, such as cashmere, alpaca, or silk.

Using a spindle

Before anything else, the basics of using a spindle should be learned. Getting to spin with a spindle is not merely a stepping stone for spinning with wheels. Even if people have already mastered the skill of spinning, they still use spindles.

What exactly is a spindle?

A spindle is actually comprised of a whorl, which is basically a wide disc that gives the proper momentum and weight that are both necessary for a long spin. The shaft part of the spindle extends either above or below of the whorl and it is responsible for holding the yarn when it starts to be spun. A hook is also utilized in transferring the spin from the spindle and to the yarn.

Making a spindle

People can actually make their own spindles. They can even make use of materials that are usually available in hardware stores. Some CDs even provide the necessary information for making spindles. These aforementioned items can be bought from the local yarn store or from an online supplier. An example of such place is Etsy, which is one of the top stores that provide customers with spindles and different fibers for spinning.

That’s how things stand right now. Keep in mind that any subject can change over time, so be sure you keep up with the latest news.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

The Good Drop Spindle

When you think about Spinning And Weaving, what do you think of first? Which aspects of Spinning And Weaving are important, which are essential, and which ones can you take or leave? You be the judge.

In spinning, there are generally no rules, but you need to follow guidelines if you want to make a very beautiful and even work. You should also understand and know the different features of a good drop spindle. There are several drop spindles available in stores and the internet, so you have to find the right model that fits your needs and personal preference.

The Ideal Drop Spindle

The drop spindle weight will rely on the kind of yarn you need to spin, like heavy spindle or heavy yarn. A drop spindle weighing more than 4 ounces, or similar to a medium-sized apple may be too heavy for regular use. The 1/2 ounce drop spindle weighs about the same as a walnut. Experts agree that the right weight is between 1.5 to 2.5 ounces. Balance is very important. The location of the whorl on the shaft will affect the balance of the drop spindle, just like the whorl shape.

Check the bottom-whorl spindle by resting the tip over the right surface and twirling it. Allow the fingers to flick the shaft so that it will spin, then create a circle using your fingers to let the spindle rotate freely, but still keeping its position upright. Check the top-whorl spindle by connecting a short length of yarn to the top of the hook, then give a quick roll to the shaft using your fingers and let the drop spindle begin rotating. Spin the drop spindle a number of times. Observe the drop spindle if it rotates freely, appears sluggish, wobbles frequently, easy to twirl or grasp or spin unusual.

About Puff

Truthfully, the only difference between you and Spinning And Weaving experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Spinning And Weaving.

Pick the material that you can spin like raw material, fiber and wool. Puff refers to the quality of the first fiber that is ideal for spinning. There are several ways and reasons why you should prepare your own fiber. Using prepared fiber, you can spin immediately. Choose medium-grade wool in batt or roving/top form. The fiber should ideally hang well when you hold it slowly. It should also include some air inside, like puff. Choose the best color, dyed or natural, then separate a piece of the fiber by pulling it free. The best segment measures around 4 to 6 inches and .5 inch wide.

Making Yarn

Fiber converts into yarn by twisting motion. Fully untwisted fiber will pull apart quickly. Twisted fiber or yarn is very strong and does not easily pull apart. The twist stems from the spindle and the conversion happens between the hands. Drafting is done to let the fibers slide past one another and then allowing the twist to catch. The size of the yarn is dependent on the amount of fiber caught by the twist. When you begin to spin, the goal is to focus on the fiber between your hands. This is the fiber that will eventually turn to yarn.

The Best Source

When looking for the right raw materials, you should compare sources first. If you intend to order things online, make sure you check the background of the dealer then determine the method of payment and delivery.

About the Author
By Anders Eriksson, now offering the host then profit baby plan for only $1 over at Host Then Profit