Archive for the ‘Carpentry’ Category

Carpentry Career Competencies

A carpentry career takes work and planning. Competencies and skills have to be built following a certain period of time. And just like any other career, success in this field also depends on the core competencies developed as one starts on the job. This is aside from the skills that are required to become a competent carpenter.

Certain competencies need to be developed as each carpentry task in different areas of work can be somewhat different. But usually, most of them involve the same basic steps. Most jobs in carpentry initially involve working from blueprints or from just instructions given by supervisors. Carpenters may also need to do the layout of the structure which now involves measuring, marking, and materials planning. Carpenters should also put into consideration if the layout fits in accordance with local building codes.

After the initial layout, carpenters may proceed with cutting and shaping wood and other associated materials. And during this time, carpenters may already be adept in using hand and power tools. Joining the materials together with nails, screws, staples, or adhesives comes next. After that, carpenters would then do a final check of the accuracy of their work according to the blueprint provided.

This would require the use of levels, rules, plumb bobs, carpentry squares, and measuring equipment. If there are corrections, carpenters should also know how to make the necessary adjustments. Just by going through the basic process, it can be understood that certain carpentry competencies can be important, even in entry level jobs.

For future carpenters, there is an important need to develop entry level competencies from the very start. Before one can become a well-rounded and experienced carpenter, there might be a need for a student to take the job as a carpenter’s helper. Entry level knowledge and competence usually involves learning about basic helper duties and how to perform them.

Truthfully, the only difference between you and Carpentry experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Carpentry.

As a carpenter helper knowledge about the use and care of basic materials might be needed. Entry level carpentry jobs may also require knowledge about basic interpretation of drawings and blueprints. Safety considerations on the work site as well as in the use of tools are also essential for developing entry level competencies.

After getting through the entry level carpentry basics, would be carpenters may need to equip themselves with additional developmental knowledge and training. This level would allow the carpenter to have the skills that would be required to perform standard construction and repair jobs.

Carpenters in training would go on to learn about how to work using sketches and blueprints as well as following work orders. Setting up and operating standard tools and equipment as well as learning how to work independently performing standard construction and repair tasks would already be practiced and performed at this level of competency.

From the basic and standard construction tasks and knowledge, the more experienced carpenter will now proceed to learning about more complex carpentry career knowledge. Learning how to interpret and perform more complex blueprints and drawings to exact specifications is learned at this level. Carpenters now would know how to develop and implement working schedules as well as becoming more adept in selecting and using appropriate materials.

Knowledge of advanced shop mathematics is also important since working with precision instruments and equipment are also being tackled.

If you’ve picked some pointers about Carpentry that you can put into action, then by all means, do so. You won’t really be able to gain any benefits from your new knowledge if you don’t use it.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Your Resume Should Describe Your Carpentry Career

Are you looking for some inside information on Carpentry? Here’s an up-to-date report from Carpentry experts who should know.

If you have been working as a carpenter for quite some time, it will be easy for you to look for a job. You just have to write a resume that describes your carpentry career from the time you started until the present.

Naturally, the first thing you should have on your resume is your name, contact number, social security number and other personal details.

It will be nice to put an career objective so the employer will know what type of job you are applying for so this can be placed in the right box and reviewed further later on.

The next part of your carpentry resume should include your work experience. You should state there your position, where you worked and your job responsibilities.

You should then mention your educational background. Many carpenters only completed secondary education and then pursued carpentry from a community, vocational or technical college. If there are any other certificates which you have taken after, it will be a good idea to mention them as this will surely increase your chances of being hired.

If you have any other skills apart from being a carpenter, this should also be mentioned. Some employers like the fact that you had served in the military in the past or were part of an organization in the past so just write it down.

Should you put references on your carpentry resume? It is best not to and just indicate that they will be available when it is requested.

When you are done working on your resume, review it one more time and ask yourself if you are happy with hit. If you are not , make some changes so this will look better in the eyes of the employer. You can also have someone else look at it and then take things from there.

It’s really a good idea to probe a little deeper into the subject of Carpentry. What you learn may give you the confidence you need to venture into new areas.

The general rule you must follow is that it should be short, concise and it is only when you have worked as a carpenter for a long time that this should ever be 2 pages.

Two things you that will boost your carpentry resume are;

1. You must always use keywords such as accomplished, initiated or managed when you talk about your duties, responsibilities or accomplishments.

2. Since carpenters are part of a team so you must never mention ?I? when you are writing about your accomplishes. It is best to use ?we? since you contributed to the overall performance of the team.

Will writing a good resume that indicates all the above will guarantee you a job? The answer is no because it is possible that someone else with better qualifications will be hired which means this all boils down to the interview so you have to prepare for that.

Since you don’t know what will happen, you should continue sending out as many resumes as you can so you will soon get called into an interview and hope that right after, you are hired.

Aside from mailing your carpentry resume, you can also upload these in various job sites since employers also look for potential candidates online.

You can also try your luck visiting various construction sites to see if there is any vacancy since the foremen or the person in charge will be able to tell you at once if they need someone with your expertise which you can later add as part of your long carpentry career.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Carpentry Career History

Carpentry career is one of the oldest professions. Carpentry dates back to the early days of man using crude tools. Ancient Greeks showed the skills in carpentry through the temples that they have built to show reverence for their gods and goddesses. While in Asia, ancient Japanese also showed their skill in carpentry through the buildings they have constructed. These buildings dates back to 7th century and some of these buildings are still standing up to this day.

We can trace the history of carpentry back to 8000 B.C. During this time, early people are using stone axes to construct their shelters. Several studies and researches showed that early Stone Age Europeans were building rectangular timber houses more than 100 feet long.

Egyptians were already using copper woodworking tools as early as 4000 B.C. These copper made tools evolved into bronze tools used in 2000 B.C. Egyptians were very proficient in drilling, dovetailing, mitering, and mortising wood.

The word carpenter was derived from the Latin word carpentarius. Carpentarius is the person who build the two- wheeled chariots called carpentum in Latin. Roman carpenters were already using adzes, saws, rasps, awls, gouges and planes.

In the Middle Ages, carpenters found work in large towns. They would travel along with their tools to other villages where a major construction project is ongoing. During this age, steel-edged hand tools were already part of the carpenter’s toolbox. Skills in carpentry is already much developed because of the construction of ornate designs for churches and castles.

Carpenter guilds started in the twelfth century. There were three kinds of members in the guild: masters, journeymen and apprentices. The master was a carpenter with much experience and knowledge that takes an apprentice and trains them. The apprentice trained and lived with the master. He is provided with food, clothing and shelter but works without any payment.

After five to nine years, an apprentice can become a journeyman. A journeyman can already work for wages. Eventually, he could become a master. Carpentry guilds were the forerunners of the modern labour unions and associations.

In 1724, Carpenter unions were established to help workers in such things as regulated number of hours. Work hours used to be eleven hours but through the union efforts it was lessened to the present standard of eight hours. Benefits and assistance were also offered to unemployed members.

During the Renaissance period and afterward, carpenters were already constructing splendid buildings in this period. Meanwhile medieval carpenters were already using tools that can be found in modern toolboxes. As a matter of fact, in 1873 the electric power drill was used for the first time. The hand drill was developed in used in 1917. Electric portable saws were being used in 1925.

Is everything making sense so far? If not, I’m sure that with just a little more reading, all the facts will fall into place.

There was a city literally hammered together in the 1700′s by carpenters. Much of the work was done by slaves that the builders own or hired, but the carpenters worked on the structures, smokehouses, dairies and other outbuildings. They also worked on the brick structures lay-outing. The colonial city that they built is the City of Williamsburg.

Colonial carpenters built the city of Williamsburg and it still stand today. This colonial city prides their historic attractions as testament to the skill of the colonial carpenters. There would be reenactments of colonial life in this city and the construction being done during the 1700s.

Nowadays a carpentry career is much easier with the aid of different electronic tools that make work easier and more efficient. But the heights reached by the current carpentry can never be accomplished without its rich history.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

The Hazards of a Carpentry Career

More than 1.2 million Americans are carpenters in 2002. Carpenters are much involved in laborious and manual tasks, it is unavoidable that some carpenters get injured while they are performing their jobs. A carpentry career is one of the most hazardous jobs.

Carpentry jobs are not only physically demanding but are also emotionally and mentally demanding. Physical demands include sitting, standing, walking, climbing, crawling, bending, carrying and lifting heavy equipment without limitations or aids to perform the activities.

Not only is carpentry physically challenging but it also requires ability to learn, remember, and integrate rules, policies or practices guiding the performance of an activity. It also requires ability to communicate verbally especially with supervisors, co-workers and students to gather information and/or explain procedures.

Carpentry also requires ability to record very limited information such as phone messages or other brief notations using handwritten or mechanical means. Ability to hear and understand speech on limited basis using amplifying equipment and hearing aid is also needed.

Because of using powered and non-powered tools, carpenters may fall victims to electrocution, being struck by broken drills, cutters, and other equipment that may end to serious eye, head, facial injury, cuts and lacerations.

They are also frequently working at heights which may include mobile plant including mobile platform. Fall from heights are possibilities which may lead to potential death or serious injury.

Carpenters are also regularly exposed to hazardous substances such as wood dust, asbestos, medium density fireboard (MDF). Short-term exposure to such substances may result into respiratory complications. While long-term exposure may lead to chronic respiratory illnesses including asbestosis.

It’s really a good idea to probe a little deeper into the subject of Carpentry. What you learn may give you the confidence you need to venture into new areas.

To avoid these, it is important to assess the work area and identify the materials that contain asbestos before starting the job. It is also important to provide a Material Safety Data Sheet (MSDS) so that carpenters and other employees may know what hazardous materials they are expected to deal with and take the necessary precautions.

It is also important to provide dust bags for hand tools and appropriate personal protective equipment (PPE) to serve as protection against the dust and chemical vapours. It is also important to follow the safety procedures and working instructions written on the MSDS.

Meanwhile, all the physical working and manual handling like bending, reaching, pulling, stretching, lifting, repetitive motions and awkward posture may lead to musculoskeletal disorders (MSD). These disorders affect the body’s muscles, joints, tendons, ligaments and nerves.

Health problems may range from discomfort, minor aches and pains, to more serious medical conditions requiring time-off work and even medical treatment. There may even be chronic cases that can lead to permanent disability. To avoid MSD, providing training in safe manual handling techniques, providing mechanical aids, team lifts, and exercising before shift or working day is necessary.

Exposure to noise is also something that cannot be avoided. Long term exposure to excessive noise can lead to hearing loss. It is important to use the appropriate PPE to limit exposure to excessive noise.

Carpenters are also frequently exposed to sun, rain, and other climate changes. They may be exposed to hot weather conditions. Exposure to hot weather may lead to heat rashes, heat cramps, heat stress, dehydration and sunburn. It is important to have regular breaks to have time to avoid the sun. Meanwhile, in extreme weather conditions like intense heat, it is better to re-schedule work. Lots of water and fluid intake is a great way of avoiding dehydration. Also, dress appropriately to avoid rashes and sunburn.

Since a carpentry career is a male dominated profession, females working in this field cannot avoid experiencing sexual harassment. Even males experience work place bullying. This may result to emotional stress, fear and anxiety and physical illness. It is important to establish work place policy and strictly enforce this policy. There must be work place briefings and trainings instructing employees to report any cases similar to these immediately.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

The Career Basics of Carpentry

Carpenters are skilled people in crafts making who perform carpentry. Carpentry involves a wide range of woodworking. Constructing may include woodworking, buildings, furniture, and other objects made out of wood. Entering this profession needs on to be informed of the career basics of carpentry.

Of course, knowledge of the chosen profession is important. Passion is not enough to select a field, it is also important to know the nature and necessities a career you’re interested in requires.

Due to intense physical and manual labor this career requires, most of the carpenters are male. Almost 98.5 % of carpenters are male, making it the fourth most dominated occupation in United States.

There are about 1.2 million carpentry jobs in 2002. Most of them are contractors who build or repair buildings. Other carpenters work for manufacturing firms, government agencies, retail stores, and schools. About 30 percent of carpenters are self-employed.

There are different types of carpenters. Knowing each type or occupation description may help future carpenters to decide on what field to specialize. The following are the different types of carpentry jobs:

? Mayster ? involved in rough carpentry; includes framing, formwork, roofing and other structural or large-scale work that is not necessarily polished in appearance.

? Joister- involved in putting floor joists. Floor joists are horizontal boards that provide the floor strength in holding the weight.

? Finish carpenter- involved in finish carpentry which is cabinetry, furniture making, fine woodworking, model building, instrument making, parquetry, and other carpentry that require minimal margin of error.

? Trim carpenter- involved in molding and trim like door and window casings, mantle, baseboard and ornamental work.

? Cabinetmaker ? involved in cabinet, wardrobe, dressers, storage chests and other furniture making which function is for storage

? Ship’s carpenter- involved in shipbuilding, maintenance and repair, and carpentry specific to nautical needs.

? Scenic carpenter ? involved in scenery and set production for films, television and theatre

See how much you can learn about Carpentry when you take a little time to read a well-researched article? Don’t miss out on the rest of this great information.

? Framer- involved in building skeletal structures or frameworks of buildings.

? Roofer- involved and specialized in roof construction especially on rafters, beams and trusses

? Millwrights ? involved primarily in metal and with machinery and equipment requiring precision

? Piledrivers – involved in the installation of heavy timbers requiring the use of cranes and the skill of rigging

? Plasterer – mix and apply cement and gypsum based wet plaster to provide a fire-resistant finish to internal surfaces such as walls and ceilings, etc

To gather much knowledge on their chosen profession, carpenters learn their trade through on the job trainings, formal training programmes, vocational education or employer training and apprenticeships. As early as high school, carpentry is already being taught in school trough courses like carpentry, shop, drawing and math.

Apprenticeships combine on the job training and classroom work. Applicants for an apprenticeship are required to be at least 18 years old and pass an exam to see if they have the skills to become a carpenter. The length of the program is usually 3 to 4 years. Starting carpenters learn under the supervision of more experienced practitioners.

Aside from laborious and arduous tasks a carpenter does, carpentry jobs also requires or engage in the following tasks:

? Reading blueprints and/or getting instructions from a supervisor

? Doing the layout including selecting materials, method or work and measuring and marking materials to avoid costly mistakes

? Cutting and shaping materials and joining them together

? Checking completed units to be sure they are level, square, plumb and the right shape, size and location

Knowing the career basic of carpentry of course makes a soon-to-be-carpenter groomed for taking the necessary steps needed to become one.

Hopefully the sections above have contributed to your understanding of Carpentry. Share your new understanding about Carpentry with others. They’ll thank you for it.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Carpentry as a Career

Imagine the next time you join a discussion about Carpentry. When you start sharing the fascinating Carpentry facts below, your friends will be absolutely amazed.

Some people are meant to be stockbrokers while others are bankers. If you like working with your hands, perhaps you should consider carpentry as a career. A carpenter is someone who builds stuff primarily from wood. He cuts, fits and joins the parts together to form something as basic like a chair or a table.

There are two types of carpenters around. The first is the residential carpenter while the other is commercial. One works in people’s homes while the other gets to work in a construction site like an office and since he gets to work in different places, it requires a lot of certification.

In most construction projects, contractors have more than one carpenter on hand to get the job done.

For starters, a rough carpenter is called in to do rough carpentry work like assemble the frames, formwork, roofing and other large scale work which does not require a polished appearance.

Someone who does a similar job to the rough carpenter is the framer. The difference between the two is that the framer builds the skeletal structure of a building and some of the techniques he uses which the rough carpenter may not be familiar with include balloon framing, platform framing or timber framing.

When he is finished, another carpenter known as a joister comes in to put floor joists that happen to be the horizontal boards that connect the frame of the structure at the level just below the floor so it will be able to hold the weight. This is also used for the deck of a building.

It seems like new information is discovered about something every day. And the topic of Carpentry is no exception. Keep reading to get more fresh news about Carpentry.

Once this is in place, the finish carpenter or joiner finishes the work done by the two individuals. Some of the things they work on include cabinets, chairs and tables.

As for the doors, windows and other ornamental work, that job is taken cared of by the trim carpenter.

The roofer specializes in roof construction by taking care of the beams, rafters and trusses.

But carpenters do not work only in construction sites. Some find employment in the entertainment industry as part of the stage crew when a film or television show is being made. Their job is to make the set and then dismantle it when the show is over. Other carpenters may also find work in building, maintaining or repairing ships.

Wherever the carpenter works, he has to certain rules to get the job done. Before hammering away, he has to look at the layout then do some measurements. This will enable him to estimate how much materials will be needed and how long it will take to complete. When the materials are ready, some of the wood is cut in the specific shape while other tools are used to increase the accuracy of his work.

When the project is complete, he can look back and be proud of what he did then add this to his portfolio.

You should know that a carpentry career is quite stressful. You will have to bend, climb, kneel and do all sorts of things to get the job done. You are at risk of getting hurt since you could fall, slip or cut yourself when you are working with sharp tools. But if you are able to overcome that, then you will know doubt have a successful career as a carpenter.

Don’t limit yourself by refusing to learn the details about Carpentry. The more you know, the easier it will be to focus on what’s important.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Tools for Carpentry Career

This article explains a few things about Carpentry, and if you’re interested, then this is worth reading, because you can never tell what you don’t know.

If you want to pursue a carpentry career, it is best to be prepared. You may have the education but one thing you need are the tools that comes in different shapes and sizes. Let’s talk about some of these. Every carpenter needs a hammer. It’s that tool that has a wooden handle with metal on top that will enable you to drive impact into an object like a nail.

Before you cut, one thing you will need is measuring tape. When you know how much you have to cut and mark it with a pencil, it will be easy for you to use the next tool which is the saw.

The saw is a cutting tool. Some can cut wood while others can cut through steel. Its lightweight compared to the power saw so you won’t have a hard time working with it manually.

There are some things that a saw cannot cut through and for that, you need a chisel. This is a sharp tool often used with a hammer or mallet to carve through wood, metal or stone. Some handles and blades are made entirely out of metal or wood.

Another cutting tool similar to the chisel is the gouge. The only difference between the two is that the blade edge is not flat but curved or angled in cross section. Just like the chisel, there are different versions available. If the angle of the plane of the blade is on the outer surface of the curve, this is called an ?incannel? gouge.’ The opposite is known as an ?outcannel gouge.?

The more authentic information about Carpentry you know, the more likely people are to consider you a Carpentry expert. Read on for even more Carpentry facts that you can share.

Hammering and cutting is not the only thing you do as a carpenter. Sometimes, you have to hang a shelf on the wall or put two pieces of wood together. For that, you will need your handy screwdriver. There are two types. One is the flathead while the other is called the Philips. These are also available in different sizes depending on the screws that you will be using.

But before you screw it, you will need to make a few holes which can’t be done without some auger bits. You don’t drill a hole using your hand so you attach this to a power drill which will make the job faster and easier.

You will also need a bunch of screws and nails. These are cheap so you won’t have a hard time getting these from the hardware store.

All of these tools should be kept in a steel tool box so it will be easy to carry whenever you have to work on site. The things that you will use most often should be placed in your carpenter’s belt so you don’t have to move from one place to another just because you forgot something in the toolbox.

There are other tools aside from those mentioned above. All of these are sold separately and can be purchased from your neighborhood hardware store or online so it is not that hard to acquire.

These tools should be kept clean so it will be easy to get whenever you are called to do a job. These have to be replaced from time to time due to wear so be ready to buy new ones as this is all in a day’s work for those who pursue a carpentry career.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Benefits As A Member of the Union When You Pursue a Carpentry Career

You should be able to find several indispensable facts about Carpentry in the following paragraphs. If there’s at least one fact you didn’t know before, imagine the difference it might make.

Being a carpenter involves a lot of backbreaking work. Is it worth pursuing? It depends who you ask but those who have been doing it for years are satisfied with the benefits they get choosing a carpentry career.

One thing that most people would like to know is how much do you earn as a carpenter. Depending on your experience and where you are working, the annual salary range is from a little less than $18,000 to just a little over $49,000.

Since most carpenters are part of a union, you can expect to be covered with insurance, medical, dental, vision, medicine, disability and pension benefits. This means that the longer you stay, the more you get.

You become part of the union the moment you sign up as an apprentice. This will allow you to train in various centers in the US and Canada so your skills are updated with any developments in the construction industry.

What is even better is that you don’t have pay for it because this is shouldered by the union. Of course this is not entirely true because they are just returning what is due to you when a certain percentage of your salary is given to them in the form of union dues.

Further training can also be acquired given that the union has partnerships with contractors, government agencies, industry users and suppliers.

It seems like new information is discovered about something every day. And the topic of Carpentry is no exception. Keep reading to get more fresh news about Carpentry.

Since you have the opportunity to study in both, get the one that offers classroom instruction and not just on the job training because it is nice to learn theories first before applying it which makes you a better candidate to land a high paying job.

One other benefit of being part of the union is the ability to find work. They can call up some people they know so you will be able to put food on the table however this should not stop you from looking for employment on your own by looking at newspaper ads, online or calling your former employer.

Wherever you work, pay is commensurate with experience. In carpentry, this could mean leaving carpentry and then moving up to a managerial position within the company. If you are ready to go into business, you can leave your employer and start up your own firm. Instead of doing the back breaking work, you will have people doing that for you so make sure that your employees are able to satisfy the demands of the customer.

The benefits you get in a carpentry career are many and the one you will probably thank who is looking out for you is the union. But if you want to become more successful than others, you have to show that in your performance everyday on the job so people will take notice and praise you for hard work and dedication.

To know more about what other benefits you get when you decide to become a carpenter, you should take this up with your union representative. There are some variations from state to state which is something you have to live with.

If you don’t want to be part of the union, think again because there are more benefits as a member compared to a non-member for people who want to pursue a carpentry career.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Do You Really Want To Pursue a Career in Carpentry

Do you ever feel like you know just enough about Carpentry to be dangerous? Let’s see if we can fill in some of the gaps with the latest info from Carpentry experts.

Carpentry is a specialized skill that takes a lot of physical work. If you really want to pursue a carpentry career, here are a few things you should do.

First, you should ask whether or not this is a good career choice for you. Do you know what a carpenter does? Do you have what it takes to do back breaking work the whole day and return the day after doing the same thing until the project is completed?

If you are convinced that you want to become a carpenter, one thing you thing you have to do is finish high school. This will give you time to practice your skills in shop class and brush up on your mathematical and reading skills so you can look at the blueprints then convert them from paper into the real thing.

One person that can help you in your carpentry career is the guidance counselor. He can help you enhance your skills in this trade by recommending a good school you can go to that helps students become good carpenters.

When the list of schools is given, read the curriculum offered by each one. You should take note of the admission policies, the cost of tuition and the success rates of the graduates especially where they are working right now.

If your Carpentry facts are out-of-date, how will that affect your actions and decisions? Make certain you don’t let important Carpentry information slip by you.

Upon graduation from the secondary program, find employment through an apprentice program. You can get in touch with the Associated General Contractors, the Associated Builders and Contractors or the National Association of Home Builders.

If there are none available, see if you can get a beginner’s position from a carpentry contractor. This will give you the opportunity to learn other things about being a carpenter that are not taught in the classroom. The better skilled you are, the higher the chances of finding work even during tough economic times.

When you have enough experience, it is time to find a job. Look at ads in the paper or online and apply to them even if you don’t qualify for it. This will give you the opportunity to know what employers are looking for so you can take courses and specialize in it which will be good for you in the future.

Some people who pursue a carpentry career will work for other people for the long term while others will open up their own carpentry firm and hire other people to work for them. You have to remember that a good or bad job with one customer will surely spread around so if you want to attract more business, you have to do your best every time you are hired to do the job.

Regardless of where you are right now, make it an effort to do your best so you feel good about yourself and what you have accomplished since you are part of the team.

It takes someone who is good with his hands to have a successful carpentry career. If you have tried it and things work well for you, then you have found your true calling. But if things go the other way, don’t feel bad because at least you gave it your best shot. This just means that you are cut out for something else and you just have to find it.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Carpentry Career Training

Carpentry career training may be a bit different from the usual courses that one takes in order to find a good paying job. For one, carpentry training taken at vocational schools and community colleges do not usually lead to degree courses. What a student will get after finishing a carpentry course would be a certificate of completion signifying that he or she has finished through and has completed the requirements of the course. This certificate would aid students in finding entry level carpentry jobs later on.

But in the most usual career path for most future carpenters, education and training are almost always picked up their skills while on the job. This is aside from the many others who learn about the craft from institutions and vocational schools or even apprenticeships. Each method has its own way of enriching and teaching interested participants of the essential knowledge of carpentry.

In today’s construction industry, a majority of employers try to ensure that the carpenters they hire are well adept and proficient in the craft. Such employers prefer carpenters undergo an apprenticeship program since it provides the most extensive training that can cover all aspects of carpentry. Most local and nationally recognized organizations for carpenters and the construction industry usually sponsor apprenticeships or run programs for the development and training of would be carpenters.

What makes apprenticeships so appealing to employers as well as for most other carpenters in training is that they provide practical experience in a real work setting. Apprentices do not just learn about carpentry in the classroom, they get to learn the craft the practical way- while on the job.

Most of this information comes straight from the Carpentry pros. Careful reading to the end virtually guarantees that you’ll know what they know.

It is easier for apprentices to learn and understand basic design principles and familiarize with the work of carpenters like framing, structure finishing, and layout on an actual workplace setting. What they see what is being done alongside experienced carpenters doing real work can gain them more valuable and practical knowledge about the job that no classroom can ever provide. Through actual work, they gain actual experience in using the various carpentry tools, equipment as well as the proper techniques and methods in using them. Through apprenticeships, they learn about the scope and range of tasks as well as how carpenters work with other kinds of construction jobs.

In looking for people qualified for carpentry apprenticeships, qualified candidates should at least be eighteen and above. Other programs may also require candidates to undergo testing to gauge their ability to learn. The duration for most carpentry apprenticeships can last from three to four years. This will depend on the apprentice’s skill level and ability to learn.

Aside from apprenticeships, other carpenters can also gain their skills elsewhere and through other means. There are also employers that provide additional training for their employees, especially entry level carpenters. The nature and thoroughness of that training usually depends on the size and capacity of the employer company. Sometimes, entry level carpenters would gain and receive instruction from small residential contractors.

In this case, knowledge and experience for their carpentry career may be pretty limited only to the scope of the work projects that contractors may have during the said training and instruction.

About the Author
By Anders Eriksson, feel free to visit his new GVO affiliate site: GVO

Categories